Overview

Stratix II EP2S60 DSP Development Board

The DSP Development Kit, Stratix II Edition features:
  • DSP development board, Stratix II edition
    1. Stratix II EP2S60F1020C4 device
    2. Analog I/O
    3. Two-channel, 12-bit, 125-million samples per second (MSPS) analog-to-digital (A/D) - 2 x AD9433BSQ
    4. Two-channel, 14-bit, 165-MSPS digital-to-analog (D/A) - 2 x DAC904
    5. VGA digital-to-analog converter (DAC) FMS3818
    6. Stereo audio coder/decoder (CODEC), 96 KHz
  • Digital I/O
    1. Connector for the Texas Instruments (TI) Evaluation Module (TI-EVM) to enable peripheral expansion and FPGA coprocessing
    2. Two 40-pin connectors for Analog Devices' A/D converter evaluation boards
    3. Mictor connector for Agilent and Tektronix logic analyzers
    4. RS 232 serial port
    5. 10/100 Ethernet physical layer/media access control (PHY/MAC) LAN91C111 and RJ-45 jack
  • Memory
    1. 32-Mbyte SDR SDRAM 2 x MT48LC4M32B2
    2. 16-Mbyte NOR Flash S29GL128M10TFIR1
    3. 1-Mbyte SRAM 2 x IDT71V416S
    4. 16-Mbyte compact flash
  • Power regulators
    1. LTC1778EGN: wide operating range, no RSENSE step-down controller
    2. LTC1326CS8: micropower precision triple supply monitor
    3. LT1085CM: 7.5-A, 5-A, 3-A low dropout positive adjustable regulators
  • MATLAB/Simulink evaluation software
  • DSP Builder development tool
  • Quartus II Development Kit Edition (DKE)
  • Evaluation IP cores
  • System reference designs and labs
  • DSP Builder filtering design
  • DSP Builder/SOPC Builder image processing reference design
  • Fast Fourier transform (FFT) coprocessor reference design for TI's TMS320C6416 DSK
  • Nios┬« II reference designs
  • Cables and accessories
  • USB-BlasterTM download cable
  • Serial cable (RS-232)
  • Power supply
  • International power cords

Issue tracking

View all issues | Gantt