Project

General

Profile

Bug #863

Fix errors 405.2, 405.4, 405.6, 405.8, - Absolute value x10 gain comparison

Added by tin almost 7 years ago. Updated over 4 years ago.

Status:
Closed
Priority:
Normal
Assignee:
Target version:
-
Start date:
12/15/2013
Due date:
12/22/2013
% Done:

100%

Estimated time:

Description

DAC U531 is programmed to generate 0.51 VDC at PRECOMP. That signal is then
applied to ACF through R560 and U532 (DAC line pulled low). ACF is routed to AMP
IN via U526, Q516, and the AC input buffer.

AMP IN is tied to the inverting and non-inverting paths of the variable gain ampliÞer
(VGA). NETOUT (output of U519) is routed to the Zero-Crossing AmpliÞer which,
based on the polarity, generates the appropriate COMP- signal that is applied to comparator
U507. The comparator selects the path that the AMP IN signal will follow
through the VGA by closing the appropriate analog switches of U509.

The positive (non-inverting) AMP IN signal path with the VGA at x10 is through R530,
Q508, Q507, U519, R531, U509, Q501, and U516 to pin 12 of multiplexer U511. The output
(OUT) of the multiplexer is routed through buffer U342 to ACV/A. The signal at
ACV/A is routed through U320 (/AC pulled low) and applied to the A/D buffer
(U322), which is conÞgured for x1 gain.

Measure the voltage at A/D IN. It should be same value that was measured in test
405.1.

#1

Updated by tin over 4 years ago

  • Status changed from New to Closed
  • % Done changed from 0 to 100

Also available in: Atom PDF