Support #753
Receive scope, initial inspection
Added by tin about 9 years ago. Updated over 8 years ago.
100%
Files
IMAG0167.jpg (1.31 MB) IMAG0167.jpg | tin, 05/22/2013 11:52 PM | ||
IMAG0168.jpg (1.39 MB) IMAG0168.jpg | tin, 05/22/2013 11:52 PM | ||
IMAG0171.jpg (812 KB) IMAG0171.jpg | tin, 05/22/2013 11:52 PM | ||
IMAG0186.jpg (1.12 MB) IMAG0186.jpg | tin, 05/22/2013 11:52 PM | ||
IMAG0195.jpg (1.5 MB) IMAG0195.jpg | tin, 05/22/2013 11:52 PM | ||
IMAG0200.jpg (1.54 MB) IMAG0200.jpg | tin, 05/22/2013 11:52 PM | ||
071701102.pdf (5.26 MB) 071701102.pdf | Tek Service manual for TDS7000/CSA7404 series | tin, 05/22/2013 11:52 PM | |
071701002.pdf (5.15 MB) 071701002.pdf | Tek User manual for TDS7000/CSA7404 series | tin, 05/22/2013 11:52 PM |
Updated by tin about 9 years ago
- Status changed from New to In Progress
- % Done changed from 0 to 50
Damaged housing
Faulty 2200uF/6.3V capacitor on x86 CPU socket area -> Replaced to new 2200uF/16V
Acquisition Board to PPC Board interface board -> tested OK (TDS7704B test pass)
Acquisition Board & PPC power board -> tested OK (TDS7704B test pass)
Acquisition Board to power Board interface board -> tested OK (TDS7704B test pass)
Power supply -> tested OK (TDS7704B test pass, same power supply).
Missing heatsink on U700 IC on ACQ Board -> suspect BGA damage?
HDD reports SMART fail. Still able to boot Win98.
CD-RW in drive contains Tekscope software ver 2.5.3
Tekscope software does not run (just shows splash screen on startup and does nothing, PPC board rools "post codes")
Updated by tin about 9 years ago
- File IMAG0167.jpg IMAG0167.jpg added
- File IMAG0168.jpg IMAG0168.jpg added
- File IMAG0171.jpg IMAG0171.jpg added
- File IMAG0186.jpg IMAG0186.jpg added
- File IMAG0195.jpg IMAG0195.jpg added
- File IMAG0200.jpg IMAG0200.jpg added
- File 071701102.pdf 071701102.pdf added
- File 071701002.pdf 071701002.pdf added
Updated by tin over 8 years ago
- Status changed from In Progress to Closed
- % Done changed from 50 to 100