Feature #1073
Initial firmware to read/write SPD EEPROM (EC)
Start date:
04/23/2014
Due date:
05/21/2014
% Done:
0%
Estimated time:
Description
LPC11U37 firmware for onboard programming without RPI.
Updated by tin almost 9 years ago
- Status changed from New to In Progress
T001
SEGGER J-Link Commander V4.66 ('?' for help) Compiled Mar 11 2013 11:01:06 DLL version V4.66, compiled Mar 11 2013 11:00:46 Firmware: J-Link ARM V8 compiled Nov 25 2013 19:20:08 Hardware: V8.00 S/N: 58001333 Feature(s): RDI, FlashBP, FlashDL, JFlash, GDB VTarget = 3.306V Info: Could not measure total IR len. TDO is constant high. Info: Could not measure total IR len. TDO is constant high. No devices found on JTAG chain. Trying to find device on SWD. Info: Found SWD-DP with ID 0x0BB11477 Info: FPUnit: 4 code (BP) slots and 0 literal slots Info: Found Cortex-M0 r0p0, Little endian. Cortex-M0 identified. JTAG speed: 100 kHz J-Link>
T002
SEGGER J-Link Commander V4.66 ('?' for help) Compiled Mar 11 2013 11:01:06 DLL version V4.66, compiled Mar 11 2013 11:00:46 Firmware: J-Link ARM V8 compiled Nov 25 2013 19:20:08 Hardware: V8.00 S/N: 58001333 Feature(s): RDI, FlashBP, FlashDL, JFlash, GDB VTarget = 3.313V Info: Found SWD-DP with ID 0x0BB11477 Info: FPUnit: 4 code (BP) slots and 0 literal slots Info: Found Cortex-M0 r0p0, Little endian. Found 1 JTAG device, Total IRLen = 4: Cortex-M0 identified. JTAG speed: 100 kHz J-Link>