Feature #1072
Make DDR slot adapter for SPD read/write
Start date:
04/23/2014
Due date:
05/09/2014
% Done:
100%
Estimated time:
Description
Supported memory: 240pin DDR3 DIMM and 288pin DDR4 DIMM
Interface : I2C onboard, RPI 26pin header as interconnect
Power : +3.3V provided by Raspberry Pi
Multiple adapters support possible
Files
Updated by tin over 6 years ago
- Due date set to 05/09/2014
- % Done changed from 0 to 30
Gerber out R0.0.
Board ETA TBD.
Updated by tin about 6 years ago
- Status changed from In Progress to Resolved
- % Done changed from 40 to 100
Boards received, direct RPI access works fine.
MCU detected and works fine.
Updated by tin about 6 years ago
- Status changed from Resolved to Closed
All information posted in article